Evaluation of laminated stacking sequence under compressive load
DOI: 10.1016/0167-577X(94)90239-9
Title: Evaluation of laminated stacking sequence under compressive load
Journal Title: Materials Letters
Volume: 18
Issue: 4
Publication Date: January 1994
Start Page: 236
End Page: 242
Published online: 6 May 2003
ISSN: 0167-577X
Author: A.M. El-Habak
Affiliations: Department of Mechanical Design and Production, Faculty of Engineering, Cairo University, Cairo, Egypt
Abstract: anical properties of laminated glass fiber plastics were examined both theoretically and experimentally. The theoretical evaluation of strength was accomplished by first expressing the stress components of the Kth constituent layer as a function of force resultants. The fracture stress of the Kth constituent layer was evaluated and the load, which would cause incipient failure of laminate, was also determined. The theoretical values were compared with experimental data obtained from the quasi-static compression test at room temperature. A delamination failure surface with shear matrix cracking was observed. In general, the theoretical and experimental results for laminate stress were in agreement.
Accepted: 17 September 1993
Revised: 25 August 1993

Please Share this Paper with friends:
Comment
No.
Comment Content
User Name
Date
Post new Comment
UserName
Post to Facebook
×
Search Full Text